SAFETY TRAINING
WORKING AT HEIGHTS
Working at Heights accidents are usually serious and often result in disabling injuries and even death.
Many of us assume that working at heights injuries and fatalities occur as a result of falls from high buildings and structures, but they often occur from falls of only two to four meters.
What is working at heights?
Working at Heights or Elevated Works is considered when
any work area 1.8 meters (6ft.) and higher or you are dealing
with one or more of the following:
1.Steel Erections
2.Roof Tops
3.Catwalks
4.Stairs
5.Scaffolds
6.Ladders
7.Floor Openings
8.Excavations
9.Rapid man lifts
10.Man baskets
Why is it that Excavations is also considered asWork at Heights?
FACTORS AND SITUATIONS THAT COULD CAUSE A FALL:
· moving from one surface to another at heights;
· uncovered holes and openings;
· open ledges not barricaded;
· uneven surfaces;
· moving surfaces;
· poor lighting;
· unsuitable foot wear;
· slippery surfaces;
· wind, rain and ice;
· being struck by falling objects;
· incorrectly using a ladder; and
· incorrectly using fall arresting equipment.
4 comments:
Thanks for the information about the safety at working place specially at risky place...
Ladder safety training
Such a great information about various aspects of the working at heights. This kind of jobs offer a great risk of life when it comes to such a great height. Height Safety Training provide all the information regarding the risk of working and techniques.
Very Very good and usable post. Thank's to share your experience with us. I will try to remember these tips in my blog commenting task. safety training and equipment townsville Townsville based suppliers of quality safety equipment, safety systems and safety training to refineries, councils, mining, authorities, construction and other industrial sites.
Hello i always like your post because its always helpful for us and we are also offering this type of services.
Health and Safety Training
Post a Comment